|
|
|
 |
|
|
|
|
公司货号: DT017315(EX86181)
价格: Member only
|
| 品名: 1/10 RGT86181电动四驱攀爬越野车 |
产品尺寸: 47.50X23.70X24.20 cm |
包装尺寸: 56.5X27X28 cm |
装箱量: 1 只 |
产品包装: 彩盒 |
毛/净重.: 5.00/4.00 Kgs |
外箱规格: 58.00X30.00X30.00 cm |
Product Detail: |
| |
Specifications:
. Material: Polyamide + Hardware + Rubber
. Scale: 1/10
. Length: 475mm . Width: 237mm . Height: 242mm
. Weight: 2.9kg
. Wheelbase: 285mm
. Gear Ratio:54:1
. Drive System: 4WD Shaft Drive
. Motor: 17T RC550 with RGT motor sticker
. ESC: HobbyWing 60A waterproof ESC
. Servo: 15KG metal gear (waterproof)
. Power Battery: 7.2V 2000mAh Ni-Mh (with RGT sticker)
. Remote Control Battery: 4 x AA (not included)
. Remote Control/Receiving: 2.4G 4CH
. Remote Control Distance: More than 100 meters
. Fully Charged Usage Time: More than 30 minutes
. Charger: 9V 500mAh
Features:
.This is a subversive 1/10 climbing car. The split-transmission structure 4WD anti-transmission drive system, the horizontal rear suspension structure and the opening of the shell cover are the biggest design highlights of this car.
.In addition, there are integrally formed steel beams and solid steel pull bars, full-car bearing, high-strength powder metal gears and limited slip design, steel precision CVD and CVA structural transmission system, metal hydraulic 6 springs adjustable shock absorbers The design features of the device, the clip combination combination wheel hub and LED lamp group.
.This product is an RTR version, equipped with a 17T RC550 super torque motor, a Hobby Wing 60A waterproof ESC, a 15KG all-metal gear waterproof steering gear, a 7.2V 2000mAh Ni-MH battery that supports lithium mode, and a 4-channel remote control.
.Front design of motor reducer, split transmission structure 4WD reverse transmission drive system.
.One-piece bridge box structure, complete vehicle metal gear and large toothed belt limited slip design.
.The split shaft and the front and rear gearbox drive shafts adopt a retractable CVD all-metal configuration.
.The front drive steering shaft is designed with steel high-precision CVA structure.
.The metal cylinder hydraulic adjustable shock absorber suspension system, the front shock absorber adopts a two-stage spring structure design, and the rear shock absorber adopts a horizontal suspension design with a car shell pillar installation opening.
.The PC car shell is equipped with plastic decorative parts, and the clamshell car shell opening design makes the overall car more beautiful and convenient to use.
.The 19-inch wheel hub has a clip-on combination design and an additional wheel is shipped.
.This car is RTR version and the car shell is available in three colors of yellow, red and olive drab. We provide professional pre-sales consultation and after-sales service. If you have any questions, please feel free to contact us. |
|
|
|
|
|
|
Packaging Details: Each one package into a window box, then many pcs packed into a case.
Delivery Detail: 2 to 15days.
Port: Shenzhen/Shantou
Minimum Order Quantity: 1 Piece/Pieces This is for sample order.
Supply Ability: 10000000 Piece/Pieces per Week.
Have large quantity will make ensure again.
Payment Terms: T/T,Western Union,paypal.
|
|
|
 |
|
